Free MCSE Braindumps .com provides the best resource to prepare for the actual certification exams like 070-290, 070-293, 070-210 and more.
Welcome to Free MCSE Braindumps.com
70-296 Implementing and Supporting Microsoft Systems Management Server 2.0
Comments: webmaster@freemcsebraindumps.com
Copyright 2000-2005, Free MCSE Brain dumps .com
The material on this web site is not sponsored by, endorsed by or affiliated with
Microsoft or the MCSE certification or with any vendor such as Cisco, Oracle, Sun etc.
They own trademarks to their certifications. We use them to display information as a fair use
of the names.
QUESTION 1
You have installed an SMS primary site by using Custom Setup. During installation, you enabled NetWare
Bindery support. You want information about NetWare binary client computers on your network to appear in
your SMS site database.
What should you do?
A.Enable NetWare NDS Logon Discovery.
B.Enable NetWare NDS Client Installation.
C.Install Gateway Services for NetWare.
D.Install File and Print Services for NetWare.
E.Add Smls.scr to the logon script of the site server.
Answer: A
QUESTION 2
You want to use SNMP manager to view error messages that are generated on Microsoft Windows NT
computers on your network.
What should you do?
A.Configure the SNMP Trap Receiver on the site server only.
B.Configure the SNMP Trap Receiver on all the Windows NT computers.
C.Configure the SNMP Event to Trap Translator on the site server.
D.Configure the SNMP Event to Trap Translator for all the Windows NT computers.
Answer: D
QUESTION 3
You install SMS client software on a computer running Microsoft Windows NT Workstation.
Which service is added by default to the workstation?
A.SMS Executive.
B.SMS Client Service.
C.Network Monitor.
D.SMSINVENTORY_AGENT_NT
E.SMS_CLIENT_CONFIG_MANAGER
Answer: B
QUESTION 4
You are using Health Monitor to monitor a Microsoft Windows NT server computer on your network.
Health Monitor reports a value of 100.00 in the Percent Critical column for the network interface
component on the server computer. Health Monitor reports a value of 100.00 in the percent normal
column for the other components on the server computer.
What is the most likely cause of the value reported for the network interface?
A.An IP address conflict was detected.
B.Packets are being rejected by the router.
C.Many collisions are occurring on the network.
D.The SNMP service is not installed.
E.Network Monitor is not installed.
Answer: D
QUESTION 5
A Microsoft Windows NT server computer is configured as a client access point in your SMS site. You
want to use Health Monitor the network interface component on the server computer.
What can you install on the server computer to make network interface information available?
A.WBEM
B.SNMP service.
C.Response probe.
D.Health Monitor console.
E.Network monitor.
Answer: B
QUESTION 6
Alecnet 'ss network consists of a single IP subnet. All computers on the network are
running Microsoft Windows NT Workstation or Microsoft Windows NT server and are DHCP clients.
There are three domains on your network named CORP.MIS, and SALES.
The MIS domain and the SALES domain both trust the CORP domain. The domain Admins group in the
CORP domain is a member of the Administrators group on all computers on the network.
You use Custom setup to install an SMS primary site server on a domain controller in the MIS domain.
The site settings are set to the default values. The SMS service account is a member of the Domain
Admins group in the CORP domain.
You want to accomplish the following goals:
*The domain controllers of each domain will be configured as logon points
*The domain controllers of each domain will be configured as client access points
*All computers on the network will have SMS client software installed.
*All computers on the network will report their hardware inventory data without user intervention.
You take the following actions:
*Enable Windows NT remote client installation for all supported platforms.
*Configure Windows NT Remote Client Installation for all supported platforms
*Enable and schedule network discovery for all client operating systems
*Enable hardware inventory on client computers.
Which result or results do these actions produce? (Choose all that apply)
A.The domain controllers of each domain are configured as logon points.
B.The domain controllers of each domain are configured as client access points.
C.All computers on the network have SMS client software installed.
D.All computers on the network will their hardware inventory data without user intervention.
Answer: C, D
QUESTION 7
Your network includes a Microsoft Windows NT server computer named DC3. You want DC3 to serve as
a client access point in your SMS site.
Which action must you perform before you can configure DC3 as a client access point in the site?
A.Run SMS Setup on DC3.
B.Run the Runsms.bat file on DC3.
C.Make the SMS service account a member of the Administrators group on DC3.
D.Make the SMS client remote installation account a member of the Administrator group on Dc3.
E.Copy the SMS client software from the site server to Dc3.
Answer: A
QUESTION 8
Alecnet 'ss SMS site consists of two Microsoft Windows NT domains named CORP and
RESEARCH. Technicians who support the computers in the RESEARCH domain are members of the
ResTechSupport global group in the CORP domain. The RESEARCH domain trusts the CORP domain.
You want to enable members of the ResTechSupport group to use the SMS Administrator console to
view only the SMS information about computers in the RESEARCH domain.
Which two actions should you take? (Choose two)
A.Add the ResTrechSupport group to the SMS Admins group on the site server.
B.Add the RestTechSupport group to the Administrators group in the RESEARCH domain.
C.Add the ResTrechSupport group to the SMS Admins group on the computers that use the SMS administrator
console.
D.Create a collection for the computers in the RESEARCHG domain. Grant the ResTrechSupport group Read
and read Resource permissions to that collection.
E.Create a collection for the computers in the RESEARCHG domain. Grant the ResTrechSupport group Read
and Administer permissions to that collection.
Answer: A, D
QUESTION 9
You plan to install SMS sites at four remote locations. You need to decide whether to install a primary
site server or a secondary site server at each location.
What are two benefits of installing a secondary site server instead of a primary site server? (Choose two)
A.A secondary site server does not need access to a Microsoft SQL server.
B.A secondary site server does not use as much disk space and processing power.
C.A secondary site server can report collected inventory data directly to the SMS database that is on the , SQL
server in the parentsite.
D. You can designate an SMS administrator for the secondary site server. The SMS administrator can use the
SMS
administrator console to view and manage inventory data for that site only.
E.You can distribute software packages to the secondary site server. You can then allow the SMS administrator
for that site to distribute the software packages to client computers in that site only.
Answer: A, B
QUESTION 10
You plan to configure a site hierarchy as follows:
LondonandParisreport toRome
TokyoandSeoulreport toTaipeiRomeandTaipeireport toVancouver
What is the relationship ofRometoParis?
A.Romeis a child site forParis.
B.Romeis a parent site forParis.
C.Romeis a central site toParis.
D.Romeis a secondary site toParis.
E.No relationship exists.
Answer: B
QUESTION 11
Your network includes one Microsoft Windows NT server computer and three NetWare servers.
Which three roles can the NetWare servers perform in your SMS site? (Choose Three)
A.Logon point.
B.Distribution point.
C.Client access point.
D.Component server.
E.Secondary site server.
F.Software metering server.
Answer: A, B, C
QUESTION 12
You want to upgrade a primary SMS 1.2 site server to SMS 2.0. You want to use the existing SMS 1.2
queries after the upgrade.
What should you do?
A.Install SMS 2.0 in the same directory tree as SMS 1.2.
B.Document the existing queries. Use the information to manually create new queries.
C.Export the existing queries to a text file. Import the text file into the queries Window in the SMS
administrator console.
D.Copy the existing queries to a new directory. After the upgrade, paste the queries into the queries Window in
the SMS administrator console.
Answer: C
QUESTION 13
Alecnet 'ss network includes 50 client computers that log on to a NetWare 3.12 server. The client
computers are located on their own IPX network, and they use IPX/SPX as their only network protocol.
The SMS site server is using TCP/IP as its only network protocol. You want the client computers to
report their inventory data to your SMS site.
What should you do? (Choose all that apply)
A.Install TCP/IP on the NetWare server.
B.Install Gateway services for NetWare on the site server.
C.Add the IP subnet of the client computers to your site.
D.Add the IPX network number to the site boundaries.
E.Configure the NetWare server as a logon point in your site.
F.Configure the NetWare server as a client access point in your site.
Answer: B, D, E, F
QUESTION 14
Your network consists of two sites, one inLondonand one inParis. TheLondonsite is central SMS 1.2 site.
TheParissite is a secondary SMS 1.2 site that reports toLondon.
The central site is configured to use Microsoft sq server 6.5, which runs on a separate computer. You want to
upgrade the central site to SMS 2.0
Which two actions must you perform before you can start the upgrade? (Choose all that apply)
A.Install Microsoft Internet Explorer 4.01 service Pack 1 or later on the central site server.
B.Install Microsoft Internet Explorer 4.01 service Pack 1 or later on the secondary site server.
C.Install Microsoft Windows NT server 4.0 service pack 4 or later on the central site server.
D.Upgrade the SQL server computer to SQL server 7.0
E.Convert the SMS databases to SMS 2.0 database format.
Answer: A, C
QUESTION 15
You create package to install a custom application. You verify that the packages has been distributed to
three different distribution points within your SMS site
You then create an advertisement for the package hat targets a collection. You notice that the
advertisements are not being received by any client computers in your site.
What is the most likely cause of the problem?
A.One or more critical files are missing from the package.
B.There are no resources contained in the specific collection.
C.The countdown notification setting for advertisement is set too high.
D.The users of the client computers do not have permissions to access the distribution point.
Answer: D
QUESTION 16
Alecnet hs a s two SMS site named Corporate and Branch. Alecnet esm ploys 10salespeople.
Eachsales person has a portable computer that runs Microsoft Windows 98 SMS client components are
installed on the portable computers in the corporate site.
Allsalespeople work primarily in the corporate site. They report that when they log on to the Branch site
for the first time, their portable computers respond slowly. You investigate and find out that the SMS
client components are automatically being reinstalled on their portable computers. You want to ensure
that this solution does not occur in the future.
What must you do to correct the problem?
A.Configure Traveling Mode for each portable computer.
B.Change each portable computer's principal site to corporate.
C.Change each portable computer's principal site to branch.
D.Configure Traveling Mode for the Corporate site server computer.
Answer: A
QUESTION 17
You add several new Microsoft Windows NT workstation 4.0 computers to your site. You verify that the
SMS client components are installed on the workstations. You want several hours, but the Windows NT
workstation 4.0 systems collection still does not list the new workstations.
What is the most likely cause of the problem?
A.Client status messages have not been reported yet.
B.The collection update schedule has been set so that the collection is not updated.
C.The Advertised Programs Client Agent has not been installed on the new client computers.
D.The security rights that are on the collection do not allow the new client computers to be added to the
collection.
Answer: D
QUESTION 18
You want to verify the SMS components status on the primary site server.
Which two tools should you use? (Choose two)
A.WBEM Test.
B.DumpSend.
C.Network Trace.
D.Network Monitor.
E.SMS Service Manager.
F.SMS Site Manager.
Answer: C, E
QUESTION 19
You use SMS to distribute software to client computers in your site. You discover that their software is
being distributed to some of the client computers, but not to all of them. To identify the source of the
problem, you want to find out which computers are configured as client access points in your SMS
primary site.
Which tool should you use?
A.Tracer
B.MOFComp.
C.WBEM Test.
D.Network Trace.
E.Network Monitor.
Answer: D
QUESTION 20
Maria creates a package for a custom application. She then creates an advertisement to target a
collection of client computers to install the program.
Users report that the advertisement has not appeared on their client computers. You verify that the
computers are members of the specified collection.
What is the most likely cause of the problem?
A.The advertisement start time has not occurred yet.
B.The package has not been copied to any distribution points.
C.The advertised program already exists locally on each client computer.
D.The computers were not members of the collection when the advertisement was created.
Answer: D
QUESTION 21
The DHCP client computers on a subnet of Alecnet 'ss network are unable to obtain a lease from a
DHCP server. You want to find out which DHCP servers, if any, are responding to DHCP client requests.
Which tool should you use?
A.Windows NT Tracert command.
B.SMS Trace.
C.DHCP Manager.
D.Network trace.
E.Network Monitor.
Answer: E
QUESTION 22
One of the logon point computers in your SMS site fails. You replace the hard disk and reinstall
Microsoft Windows NT server on the computer that failed. Then you discover that one of your
technicians has renamed this computer.
You want to restore the logon point computer so that it functions as part of the SMS site. What should
you do?
A.Add the computer as logon point in the SMS site.
B.Copy the backup of the master site control file to \Sms\Inboxes\Sitectrl.box\Sitectrl.ct0 on the logon point
computer.
C.Restore the SMS site database so that its configuration is the same as it was before the logon point computer
failed.
D.Do nothing. The site server will automatically rebuild the logon point computer.
Answer: D
QUESTION 23
You want to establish remote control access to client computers in your site without requiring any
permissions. You disable the Permissions Required option for the remote Tools Client Agent for your
site.
You use the SMS administrator console to attempt to remotely control a Microsoft Windows NT
workstation computer. However, the client computer continues to ask for permission.
What are two possible causes of the problem? (Choose two)
A.The Remote Tools Client Agent is not running on the workstation.
B.The workstation is part of another site that has the permissions Required option Enabled.
C.Remote control permissions were set after the Remote Tools Client Agent was installed on the workstation.
D.Remote control permissions for Windows NT computers must be set independently on each computer.
E.The SMS client connection account does not have adequate permissions.
Answer: B, E
QUESTION 24
Your SMS site uses the Asynchronous RAS Sender to communicate with its child site. Packages take an
extremely long time to arrive at the child site.
A single telephone line is dedicated for use by RAS and SMS. You cannot add another telephone line to
your site for RAS.
When you monitor the usage of the RAS connection between the two sites, you discover that only 25
percent of the available bandwidth is in use when packages are being sent.
How can you enable packages to arrive more quickly?
A.Create a second sender address.
B.Increase the priority of the sender address.
C.Increase the rate limit of the sender address.
D.Increase the number of concurrent transmissions allowed for the Asynchronous RAS sender.
Answer: D
QUESTION 25
You have configured your site with software metering. Several users report that they are denied access to
an application because there is not available license
You want to verify that the client Agent has closed the application after a user has finished using the
application.
What should you do?
A.Increase the callback-polling interval.
B.Verify that the application is in the excluded programs list.
C.View the contents of the Liccli log file on the client computer.
D.Use Event Viewer to view the contents of the Application log on the software metering server.
Answer: C
QUESTION 26
You want information about .dll files that are installed on SMS client computers to appear in the
software inventory in resource explorer.
What should you do?
A.Create a custom filter rule.
B.Modify the Audit.rul file on the site server.
C.Modify the SMS_def.mof file on the site server.
D.Modify the inventory collection properties of the software inventory client agent.
E.Run a custom application that creates a NOIDMIF file on each client computer.
Answer: D
QUESTION 27
Your SMS site hierarchy consists of two sites named Campus and binding5. The site boundaries of the
two sites overlap. Windows Networking Logon Discovery and Windows Networking Logon Client
Installation are enabled in both sites.
The inventory schedule in the campus site is set to every seven days. The inventory schedule in the
Binding5 site is set to every 30 days.
You move an SMS client computer that is a member of the campus site to a subnet that is a part of both
sites. You want the client computers to report its inventory data to both sites every 30 days.
What should you do?
A.Edit the Sms.ini file on the client computers.
B.Edit the Smsis.ini file on the logon point.
C.Uninstall the SMS client software and reinstall it on the client computer.
D.Use the System Management option in control Panel on the client computer to change its principal site.
E.Use the System management option in control Panel on the client computer to enable travelling mode.
Answer: D
QUESTION 28
You select software metering when you install an SMS primary site server. Now you want to use software
metering for your site.
What should you do first?
A.Use custom Setup on the software metering server to create a software metering site system.
B.Use the SMS Administrator console to create a software metering site system or to select an existing site
system.
C.Create a collection for all client computers that will be configured for software metering.
D.Enable software inventory for all client computers that will be configured for software metering.
Answer: B
QUESTION 29
Your network consists of a central SMS site hierarchy and two child primary sites. You configure
software metering for each of the site.
You want to know which software applications have been registered in each of the sites. What should you
do?
A.Configure the Software Metering tool to show the registered applications in all sites.
B.Configure the Software Metering tool to display the registered products for all sites.
C.Use crystalline into to create a printed report that shows the registered applications in all sites.
D.Use the software metering tool to create a printed report that show the registered applications in all sites.
Answer: D
QUESTION 30
Alecnet hs a s a single SMS site. You want to distribute a payroll application to computers in the
finance department. You want to secure access to this application so that only specified users in the
finance department can install it.
What should you do?
A.Create a collection for one or more groups that can run the package.
B.Create a package access account for the specified users and set appropriate rights for the package.
C.From the SMS Administrator console, use the Security Rights option to specify one or more groups that can
run the package.
D.From the source directory that contains the application, use Microsoft Windows NT Explorer to set NTFS
security for one or more groups.
Answer: A
QUESTION 31
U7 are preparing to distribute software to a group of client computers. You want all new Microsoft
Windows 98 computers to automatically receive the software advertisement when they are added to the
SMS site.
What should you do?
A.Assign all the client computers to the same distribution point.
B.Assign all the client computers to the same client access point.
C.Create a static membership rule for the client computers.
D.Use a query to define a membership rule for the client computers.
Answer: D
QUESTION 32
You create a package to distribute an application to all Microsoft Windows NT workstation 4.0
computers in your SMS site.
What else must you create the application can be distributed to these workstations?
A.A query.
B.A collection.
C.An advertisement.
D.A distribution point.
Answer: C
QUESTION 33
Alecnet hs a s a primary site in a Microsoft Windows NT domain.Alecnet us s es TCP/IP as its
network protocol.
Alecnet ps u rchases another company. You want to create a child site on the other company's
network. This network consists of NetWare 3.12 server, and it uses IPX/SPX as its network protocol.
What should you do?
A.Install TCP/IP on the NetWare 3.12 servers. Install the secondary site fro the SMS CD-ROM on one of the
NetWare 3.12 servers.
B.Install the NWLink protocol on the SMS primary site server. Install the secondary site fro the SMS CD-ROM
on one of the NetWare 3.12 servers.
C.Convert one of the NetWare 3.12 servers to a Windows NT server computer. Install only the NWLink
protocol on the Windows NT server computer. Install the secondary site from the SMS CD-ROM on the
Windows NT server computer.
D.Convert one of the NetWare 3.12 servers to a Windows NT server computer. Install both TCP/IP and the
NWLink protocol on the Windows NT server computer. Install the secondary site from the SMS CD-ROM on
the Windows NT server computer.
Answer: C
QUESTION 34
You use Custom Setup to install an SMS primary site on Server1. You then configure your site
boundaries to include both subnets.
Which computer or computers will be automatically configured as SMS logon points?
A.Only server 1.
B.Only server1 and server 2.
C.Server 1, server 2, and server 3.
D.No computers will be automatically configured as logon points.
Answer: A
QUESTION 35
Alecnet 'ss network consists of two subnets, as shown in the exhibit.
Alecnet 'ss network has five Microsoft Windows NT server computers. The server computers
are configured as shown in the following table.
Name Role Domain
Server1 PDC CORP
Server2 BDC CORP
Server3 Member server CORP
Server4 PDC RESEARCH
Server5 BDC RESEARCH
All the server computers are on the same LAN. You run SMS setup and select the Custom option to
install a primary site on Server2.
Which server computer or computers will become client access points by default?
A.Only server 1.
B.Only server 2.
C.Only server1 and server 2.
D.Server 1, server 2, and server 3.
E.Server 1, server 2, server 4, and server 5.
F.No server computers become client access points by default.
Answer: B
Explanation: The questions asks about Client Access Point by Default.
QUESTION 36
You manage an SMS site for Alecnet fsr o m the corporate office inNew York. Your organization has
merged with another company named Fabrikam, , which has its headquarters inTokyo. The SMS site
hierarchies for Alecnet asn d for Fabrikam, , are shown in the exhibit.
You want to integrate the Fabrikam, , site hierarchy into Alecnet 'ss site hierarchy. You want the
Tokyo,TaipeiandSeoulsites to be direct child sites of theNew Yorksite.
Which three actions should you perform? (Choose Three)
A.Configure theTokyosite and theSeoulsite with a site address for theNew Yorksite.
B.Configure theNew Yorksite with a site address for theTokyo,Taipei, andSeoulsites.
C.Detach theSeoulsite and theTaipeisite from theTokyosite. Attach theTokyo,Taipei, andSeoulsites to theNew
Yorksite.
D.Attach theTokyosite to theNew Yorksite. Detach theSeoulsite and theTaipeisites from theNew Yorksite.
Attach theTaipeisite and theSeoulsite to theNew Yorksite.
E.Detach theSeoulsite from theTokyosite. Remove SMS from theTaipeisite. Attach theTokyosite and theSeoul
site to theNew Yorksite. Install theTaipeisite from theNew Yorksite.
F.Detach theSeoulsite from theTokyosite. Remove SMS from theTaipeisite and theSeoulsite. Attach theTokyo
site to theNew Yorksite. Install theSeoulsite and theTaipeisite from theNew Yorksite.
Answer: A, B, E
QUESTION 37
Your network consists of a single domain that includes one PDC and five BDCs. You install an SMS site
server on one of the BDCs. You want to configure the site for software distribution.
Which two site system roles will the computers at your site perform by default? (Choose two)
A.Each BDC will become a distribution point.
B.Each BDC will become a clear access point.
C.Each PDC will become a distribution point.
D.Each PDC will become a clear access point.
E.The site server will become a distribution point.
F.The site server will become a client access point.
Answer: E, F
QUESTION 38
Alecnet 'ss network has five Microsoft Windows NT server computers. The server computers are configured
as shown in the following table.
Name Role Domain
Server1 PDC CORP
Server2 BDC CORP
Server3 Member server CORP
Server4 PDC RESEARCH
Server5 BDC RESEARCH
All the server computers are on the same LAN. You run SMS setup and select the Custom option to
install a primary site on Server2.
Which server computer or computers will become logon points by default?
A.Only server 1.
B.Only server 2
C.Only server1 and server 2.
D.Server 1, server 2, and server 3.
E.Server 1, server 2, server 4, and server 5.
F.No server computers become logon points by default.
Answer: E
Explanation: From the MS SMS Press Book (Chapter 10, lesson 2):"Windows NT Logon Points- If
windows Networking Logon Discovery is enabled, then all domain controllers in the domains added to
this discovery method are installed as logon points. It is possible to prevent some domain controllers from
QUESTION 39
You plan to run the SMS administrator console simultaneously on four Microsoft Windows NT
workstation computers on your network.
How many available Microsoft SQL sever connections are recommended to support these four SMS
administrator consoles?
A.5
B.8
C.16
D.20
Answer: D
QUESTION 40
You have installed a primary site server at Alecnet 'ss headquarters ILondon. You want to
create a secondary site at a branch office inParis. The two locations are connected by a high-speed
WAN. Which two methods can you use to install the secondary site? (Choose two)
A.On the primary site server inLondon, run SMS Setup from the SMS setup from the SMS CD-Rom to create
theParissite.
B.On the computer inParisthat will become the secondary site server, run the SMS setup from the SMS
Cd-ROM.
C.From the SMS Administrator console in theLondonsite, create a new site forParis.
D.From the SMS Administrator console in theLondonsite, create a package and an advertisement to install the
secondary site server inParis.
E.From the SMS Administrator console in theLondonsite, select the computer inParisthat will become the
secondary site server and define it as a distribution point.
Answer: A, C
QUESTION 41
Your site hierarchy is configured as shown in the exhibit.
You want to be able to create software packages in theNew Yorksite and distribute the packages to all
other sites.
Which site addresses must exits in theNew Yorksite?
A.Only inMadridandParis.
B.OnlyLondonandBoston.
C.OnlyLondon,Boston, andParis.
D.London,Boston,Madrid, andParis.
Answer: B
QUESTION 42
You want to install a new SMS primary site server on a computer named Server 1 by using Express setup.
However, when you run SMS setup on Server1, SMS Setup does not offer you the Express option.
What is the most likely cause of the problem?
A.Microsoft SQL server is not installed on server 1.
B.Microsoft SQL server is already installed on server 1.
C.Server 1 has an Alpha processor.
D.No database device exists on server1.
E.No SMS service account exists in the server 1 domain.
Answer: B
QUESTION 43
You want SMS to notify you when an unauthorized DHCP server is found on the network. What should you
do?
A.Run Network trace.
B.Run network Monitor.
C.Run Network Monitor Control Tool.
D.Run SMS Status Message Viewer.
Answer: C
QUESTION 44
Maria uses a Microsoft Windows NT workstation computer. You want to notify Maria when a specific
SMS component reports an error status message.
How can you accomplish this goal?
A.Configure the Static Manager to report specific errors to Maria.
B.Configure the Alerter service to monitor the error status messages on the SMS site server.
C.Configure the scheduler service to periodically open the event Log and report specific error to Maria.
D.Configure a status filter rule the net Send command to notify Maria when an error static message occurs.
Answer: D
QUESTION 45
You want to quickly identify any SMS components that have failed on your site server. Which tool should
you use?
A.SMS Trace.
B.Health Monitor.
C.Network Trace.
D.Network Monitor.
Answer: C
QUESTION 46
You verify that inventory data is being collected on a Microsoft Windows NT client computer. You want
to find out whether the inventory data is being reported from this client computer to the next destination.
Which log file should you examine?
A.The Ccim32.log file on the client computer.
B.The Cqmgr32.log file on the client computer.
C.The Invproc.log file on the SMS site server.
D.The Invproc.log file on the client access point.
E.The Inboxast.log file on the client access point.
Answer: C
QUESTION 47
You install an SMS primary site. You want to back up the entire SMS site
Which directory must you back up?
A.\SMS
B.\MSSQL
C.\CAP_site code
D.\WINNT\MS\SMS
E.\WINNT\System32\WBEM
Answer: A
QUESTION 48
You install an SMS primary site on your network. As part of your installation, you
allow SMS setup to create Microsoft SQL server devices and databases. You want to back up he site
databases.
Which two actions can you take to back up the site database? (Choose two)
A.Create a dump device in the SMS Administrator console. Back up the site database by using SQL Enterprise
manager.
B.Create a dump device in the SMS administrator console. Enable export site database task in the SMS
Administrator console.
C. Create a dump device in SQL Enterprise Manager. Back up the SMS database by using SQL Enterprise
Manager with Initialize Device selected.
D.Create a dump in SQL Enterprise Manager. Enable Export site Database Task in the SMS Administrator
console.
E.Copy the SQL Server Physical device file that stores the site database to another computer.
Answer: C, D